Preliminary Work

WARNING: This page is about a different variant/trim than selected.

Remove engine cover (design cover).
- WM, 108319 REMOVING AND INSTALLING ENGINE COVER (DESIGN COVER) (V6 TURBO)
Remove air cleaner housing.
- WM, 242519 - REMOVING AND INSTALLING AIR CLEANER HOUSING (V6 TURBO)
Remove front strut.
- WM, 408619 REMOVE AND INSTALL FRONT STRUT
V6 Turbo only:
Disconnect pressure hose from throttle housing.
- WM, 244219 - REMOVING AND INSTALLING THROTTLE HOUSING (V6 BITURBO)
Only for R4:
Loosen the pressure pipe from the body and pressure hose on the engine side.
- WM, 214119 - REMOVING AND INSTALLING PRESSURE PIPE (V6 BITURBO)