Subsequent Work

1. 2.1  Insert stoppers on camshafts -1-  .
2. 2.2  Fit and tighten screws for stoppers -1-  .

   > Tightening - torque 9 Nm (6.5 ftlb.) 

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Stoppers on camshafts.

1. 3.1  Replace O-ring on screw plug for crankshaft.
2. 3.2  Position holder for vacuum reservoir -3-  .
3. 3.3  Screw in new screw plug for crankshaft -1-  into bore -2-  and tighten it.

   > Tightening - torque 40 Nm (29.5 ftlb.) 

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Screw plug for crankshaft

> 100113 - SECURING ENGINE ON ASSEMBLY SUPPORT (V6 TURBO)

1. 5.1  Position vacuum reservoir -1-  .
2. 5.2  Screw on and tighten nuts -3-  .

   > Tightening - torque 9 Nm (6.5 ftlb.) 

3. 5.3  Fit and tighten screws -2-  .

   > Tightening - torque 9 Nm (6.5 ftlb.) 

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Vacuum reservoir

1. 6.1  Position left engine carrier -1-  .
2. 6.2  Fit and tighten screws -2-  .

   > Tightening - torque 50 Nm (37 ftlb.) 

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Left engine carrier

> 477619 - REMOVING AND INSTALLING BRAKE BOOSTER VACUUM PUMP

> 244619 - REMOVING AND INSTALLING CENTRE INTAKE-AIR DISTRIBUTOR

> 153319 - REMOVING AND INSTALLING UPPER CHAIN HOUSING COVER (V6 TURBO)