LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> Macan S >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 13 Engine - Crank Drive, Pistons 3.0L -- 95B - MACAN (95B) >> WM, 137319 Removing And Installing Belt TENSIONER (Generator) (V6 Turbo) >> Install Belt TENSIONER Damper (Generator)

Install Belt TENSIONER Damper (Generator)

  1. Installation is performed in reverse order. Pay particular attention to the following:
    1. 1.1  Fit in and tighten new  screws.
    • Initial tightening 8 Nm (6 ftlb.) 
    • Final tightening + 45° 
scientia non olet · About LEMON Manuals