LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> Macan S >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> 21 Exhaust Gas Turbocharging 3.0L -- 95B - MACAN (95B) >> WM, 216719 - Removing And Installing Bypass Flap Control Box (V6 MONOTURBO) >> Installing Bypass Flap Control Box

Installing Bypass Flap Control Box

  1. Install pressure unit.
    1. 1.1  Position pressure unit with adjustable control rod on the turbocharger.
    2. 1.2  Fit and tighten nuts -1 and 2-  .
      • Tightening torque 8 Nm (6 ftlb.) 
    3. 1.3  Press ball socket -3-  onto the ball pin of the actuating lever
      G15151428Courtesy of PORSCHE CARS NORTH AMERICA, INC.

      Adjustable control box

scientia non olet · About LEMON Manuals