LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> Macan S >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> 21 Exhaust Gas Turbocharging 3.0L -- 95B - MACAN (95B) >> WM, 214119 - Removing And Installing Pressure Pipe (V6 MONOTURBO) >> Installing Pressure Pipe >> Installing Pressure Pipe (From Charge-Air Cooler To Top Of Charge-Air Cooler)

Installing Pressure Pipe (From Charge-Air Cooler To Top Of Charge-Air Cooler)

  1. Installation is performed in reverse order. Pay particular attention to the following:
    1. 1.1  Tighten screws for pressure pipe.
      • Tightening torque 8 Nm (6 ftlb.) 
    2. 1.2  Tighten screw-type clamps on pressure pipe.
      • Tightening torque 5.5 Nm (4 ftlb.) 
scientia non olet · About LEMON Manuals