Removing Pressure Pipe
WARNING: This page is about a different variant/trim than selected.
- Disconnect pressure hose at the top -1-
from pressure pipe.
Pressure hose at top of pressure pipe
- 1.1 Loosen clamp at the top -2- .
- 1.2 Pull pressure hose at the top -1- off the pressure pipe.
- 1.3 Close off openings using suitable stoppers.
- 1.4 Release and disconnect electric plug connection -3- .
- Disconnect pressure hose at the bottom -1-
from pressure pipe.
Pressure hose at bottom of pressure pipe
- 2.1 Loosen clamp at the bottom -2- .
- 2.2 Pull pressure hose at the bottom -1- off the pressure pipe.
- 2.3 Close off openings using suitable stoppers.
- 2.4 Loosen pulsation damper -4- from rubbers -3- and lay it aside.
- Remove pressure pipe -1-
Pressure pipe
- 3.1 Unscrew nuts on pressure pipe -2- .
- 3.2 Remove pressure pipe -1-