Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Screw-type clamp securing moulded hose to charge-air cooler | Tightening torque | 5.5 Nm (4 ftlb.) | |||
| Screw-type clamp securing moulded hose to turbocharger | Tightening torque | 5.5 Nm (4 ftlb.) | |||
| Screw-type clamp securing moulded hose to intake-air distributor | Tightening torque | 5.5 Nm (4 ftlb.) | |||
| Screw-type clamp securing moulded hose to pressure pipe | Tightening torque | 5.5 Nm (4 ftlb.) | |||
| Screw-type clamp securing moulded hose to pressure pipe | Tightening torque | 5.5 Nm (4 ftlb.) | |||
| Screw-type clamp securing moulded hose to charge-air cooler | Tightening torque | 5.5 Nm (4 ftlb.) |