LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> Macan GTS >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 18 (21 Exhaust Gas Turbocharging 2.0L -- 95B - MACAN (95B)) >> WM, 213919 Removing And Installing Moulded Hose (R4) >> Subsequent Work >> Subsequent Work For Moulded Hose (Turbocharger - Charge Air Cooler)

Subsequent Work For Moulded Hose (Turbocharger - Charge Air Cooler)

WARNING: This page is about a different variant/trim than selected.
  1. Install front right wheel housing liner.
  2. Install the front underbody cover and the right-hand side front underbody cover.
scientia non olet · About LEMON Manuals