LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> Macan GTS >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (10 Engine - Crankcase, Suspension 2.0L -- 95B - MACAN (95B)) >> WM, 108319 - Removing And Installing Engine Cover (Design Cover) (R4) >> Installing Engine Cover (Design Cover)

Installing Engine Cover (Design Cover)

WARNING: This page is about a different variant/trim than selected.
  1. Installation is performed in reverse order. Pay particular attention to the following:
    1. 1.1  The rubber plug-in couplings must engage securely.
    2. 1.2  Check that the engine cover (design cover) is fitted securely by pulling on it.
scientia non olet · About LEMON Manuals