LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> Macan GTS >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (10 Engine - Crankcase, Suspension 2.0L -- 95B - MACAN (95B)) >> WM, 1001IN - Secure The Engine On Assembly Support (R4) >> Preliminary Work

Preliminary Work

WARNING: This page is about a different variant/trim than selected.
  1. Remove the engine.

    > 100119 - REMOVING AND INSTALLING ENGINE 

  2. Remove flywheel.

    > 136019 - Removing and installing flywheel (R4)  , Refer to the appropriate service information.

  3. Remove intermediate plate -1-  .
    G15144648Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Intermediate plate

    1. 3.1  Guide intermediate plate -1-  over the dowel sleeves -2-  .
    2. 3.2  Lift tab -4-  on the joint flange -3-  .
    3. 3.3  Remove intermediate plate -1-  .
  4. Carefully tap out dowel sleeve on the right side -1-  in direction of -Arrow-  .
    G15144649Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Dowel sleeve on right side of engine

  5. Carefully tap out dowel sleeve on the let side -1-  in direction of -Arrow-  .
    G15144650Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Dowel sleeve on left side of engine

scientia non olet · About LEMON Manuals