| Screws for engine carrier |
M10 x 35 |
Tightening torque |
50 Nm (37 ftlb.) |
|
|
| Screws for air-conditioning compressor bracket - |
replace |
Initial tightening |
8 Nm (6 ftlb.) |
|
|
| Screws for air-conditioning compressor bracket - |
replace |
Final tightening |
+ 90° |
|
|
| Fastening screw for generator bracket to engine |
M8 x 40/replace |
Initial tightening |
8 Nm (6 ftlb.) |
|
|
| Fastening screw securing generator bracket to engine |
M8 x 40 |
Final tightening |
+ 90 (67 ftlb.) ° |
|
|
| Screw-type clamp securing pressure hose to pressure pipe |
|
Tightening torque |
5.5 Nm (4.1 ftlb.) |
|
|