Subsequent Work

Information 

The required preliminary work and subsequent work can vary depending on equipment.

The instructions provided in the document are for vehicles with the maximum possible equipment.

1. On vehicles with heated seats:  Connect electric plug connection for seat heating for backrest and secure wire harness.
   • WM, 741719 REMOVING AND INSTALLING PADDING FOR FRONT BACKREST
2. Secure wire harness for side airbag at the underside of the seat.
   • WM, 696319 REMOVING AND INSTALLING FRONT SIDE AIRBAG
3. Secure pressure line (red) under the seat.
   • WM, 723819 - REMOVING AND INSTALLING CONTROL VALVE FOR AIR CUSHION 
4. Install side trim panel for front seat, without storage tray.

   WM, 721619 - REMOVING AND INSTALLING TRIM PANEL FOR SEAT 

5. Install side cover for backrest and engage rear cover for backrest at the underside of the seat.
   • WM, 722619 - REMOVING AND INSTALLING COVER FOR BACKREST