Removing Glove Box
WARNING:
Improper handling of airbag units
- Triggering of airbag unit.
- System faults can occur.
- → Remove ignition key or remote control (hand-held transmitter) and keep it outside of the transmission range.
- → External power supply must be de-energised.
- → Disconnect the battery and isolate the ground strap so that all contact with a ground carrier is avoided.
- → Wait 1 minute after disconnecting the battery.
- → Only pull off connector on the triggering unit after the waiting time has elapsed.
- → Keep space in front of the airbag unit free.
- → Replace damaged parts.
- → Always set airbag units down with the blow-out opening facing upwards.
- → Do not place any objects on the airbag units.
- → Store airbag units in a safe place.
- → Avoid contact with grease, oil, detergents, liquids or similar substances.
- → Store airbag units in a cool place. Maximum temperature: 90°C.
- Unscrew screws "-2-" from glove box "-1-".
Mounting for glove box
- Remove glove compartment "-1-".
Glove box
- 2.1 Pull glove compartment "-1-" forward and remove it from the dashboard.
- 2.2 Release and disconnect electric plug connection "-2-".
- Release and disconnect electric plug connection "-1-" from knee airbag on passenger's side and unclip line bracket "-2-".
Electric plug connection
- Remove glove box and set it down with the knee airbag on the passenger's side facing upwards.