Preliminary Work
WARNING: This page is about a different variant/trim than selected.
NOTIFICATION
Lifting, setting the vehicle down or moving the vehicle when the air spring system is not filled
- Risk of damage to the air spring bellows
- Replace (front) air-spring strut or (rear) air spring bellows.
→ Deactivate the levelling system before raising the vehicle.
→ Do not raise or set the vehicle down when the air spring system is empty.
→ Moving unpressurised air spring bellows will cause them to fail; replace components.
- Remove rear wheel.
> 440519 - REMOVING AND INSTALLING WHEEL - SECTION ON "REMOVING"
- Remove wheel housing liner rear.
- Only for vehicles with air suspension:
Release air from the corresponding air spring.
> 430117 - DRAINING AND FILLING THE LEVEL CONTROL - SECTION ON "DRAINING"