LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> Macan Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (13 Engine - Crank Drive, Pistons 3.0L -- 95B - MACAN (95B)) >> WM, 138019 Removing And Installing Balance Shaft Drive Wheel (V6 Turbo) >> Subsequent Work

Subsequent Work

WARNING: This page is about a different variant/trim than selected.
  1. Loosen and remove special tool > T40049 - Special wrench  from the crankshaft.
  2. Install guide and tensioning rails.
  3. Install timing chains.
scientia non olet · About LEMON Manuals