Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Rear axle housing, front to body | M14 x 1.5 x 135 thread/always replace screws following removal | Initial tightening | 115 Nm | ||
| Rear axle housing, front to body | M14 x 1.5 x 135 thread/always replace screws following removal | Final tightening | + 90° | ||
| Rear axle housing, rear to body | M12 x 1.5 x 145 thread/always replace screws following removal | Initial tightening | 115 Nm | ||
| Rear axle housing, rear to body | M12 x 1.5 x 145 thread/always replace screws following removal | Final tightening | + 90° |