Technical Values
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Fastening screw for chain tensioner | Initial tightening | 4 Nm (3 ftlb.) | |||
| Fastening screw for chain tensioner | Final tightening | + 90° | |||
| Fastening screw for bearing saddle | Replace | Initial tightening | 4 Nm (3 ftlb.) | ||
| Fastening screw for bearing saddle | Final tightening | + 180° | |||
| Chain tensioner | Tightening torque | 85 Nm (63 ftlb.) | |||
| Fastening screw for chain tensioner | Tightening torque | 9 Nm (6.5 ftlb.) | |||
| Cylinder head screw (arrows) | Initial tightening | 4 Nm (3 ftlb.) | |||
| Cylinder head screw (arrows) | Final tightening | +90° |