LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> Macan Base >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 13 Engine - Crank Drive, Pistons 2.0L -- 95B - MACAN (95B) >> WM, 136319 - Removing And Installing Drive Plate (R4) >> Installing Drive Plate

Installing Drive Plate

  1. Installation is performed in reverse order. Pay particular attention to the following:
    1. 1.1  Replace screws.
    2. 1.2  Tighten new  screws in diagonally opposite sequence using VAS 6942 - torque/torque angle wrench to 20-400 Nm (15-295 ftlb.)  .

      > Initial - tightening 60 Nm (44 ftlb.) 

      > Final tightening + 90° 

scientia non olet · About LEMON Manuals