LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> Macan Base >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> 21 Exhaust Gas Turbocharging 2.0L -- 95B - MACAN (95B) >> WM, 213919 Removing And Installing Moulded Hose (R4) >> Preliminary Work >> Preliminary Work For Moulded Hose (Charge-Air Cooler - Pressure Pipe)

Preliminary Work For Moulded Hose (Charge-Air Cooler - Pressure Pipe)

  1. Remove front underbody cover and remove front underbody cover from the left.
  2. Remove front left wheel housing liner front at the left.
    • > Refer to appropriate service information
scientia non olet · About LEMON Manuals