| Connecting link to anti-roll bar |
Item 3: AM10 thread/Always replace screws and nuts following removal |
Initial tightening |
40 Nm (30 ftlb.) |
|
|
| Connecting link to anti-roll bar |
Item 3: AM10 thread/Always replace screws and nuts following removal |
Final tightening |
+ 90° |
|
|
| Connecting link to spring strut |
Item 2: M10 x 45 thread/Always replace bolts following removal |
Initial tightening |
40 Nm (30 ftlb.) |
|
|
| Connecting link to spring strut |
Item 2: M10 x 45 thread/Always replace bolts following removal |
Final tightening |
+ 90° |
|
|