LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> Macan Base >> Repair and Diagnosis >> Drivelines & Axles >> Axle Shafts >> 40 Wheel Suspension Front Drive Shaft 2.0L -- 95B - MACAN (95B) >> WM, 404319 Removing And Installing Shield (Front-Axle Carrier) >> Install Heat Shield >> Installing Heat Shield

Installing Heat Shield

  1. Position heat shield -1-  on the front-axle carrier.
    G15153632Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Installation overview of heat shield

  2. Fit and tighten screws -2 and 3-  on the heat shield -1-  .
    G15153633Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Screws on heat shield

    1. 2.1 M8 screw -3-  : > Tightening - torque 20 Nm (15 ftlb.) 
    2. 2.2 M6 screws -2-  : > Tightening - torque 9 Nm (6.5 ftlb.) 
scientia non olet · About LEMON Manuals