LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> Macan Base >> Repair and Diagnosis >> Collision >> Body Panels >> 51 - Body Center, Roof, Frame >> WM, 519219 Removing And Installing Cover For Front Underbody >> Installing Cover For Front Underbody

Installing Cover For Front Underbody

  1. INSTALLATION IS PERFORMED IN REVERSE ORDER. PAY PARTICULAR ATTENTION TO THE FOLLOWING:

    TIGHTEN SCREWS ON SIDE COVER FOR FRONT UNDERBODY TO > TIGHTENING TORQUE 2.5 (1.75 FTLB.) NM  .

    TIGHTEN SCREWS ON SIDE COVER FOR FRONT UNDERBODY TO > TIGHTENING TORQUE 2 (1.5 FTLB.) NM  .

    TIGHTEN SCREWS ON COVER FOR FRONT UNDERBODY TO > TIGHTENING TORQUE 2.5 (1.75 FTLB.) NM  .

scientia non olet · About LEMON Manuals