LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> Macan Base >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> 66 Exterior Equipment -- 95B - MACAN (95B) >> WM, 667919 - Removing And Installing Cover On V-Shaped Mirror Base >> Installing Cover On V-Shaped Mirror Base

Installing Cover On V-Shaped Mirror Base

  1. Installation is performed in reverse order. Pay particular attention to the following:

    Tighten screw for cover on V-shaped mirror base to > Tightening - torque 20 Nm (15 ftlb.)  .

    Tighten screws on rotary plate to > Tightening - torque 5 Nm (3.5 ftlb.)  .

scientia non olet · About LEMON Manuals