Removing Front Camera
NOTIFICATION
CAUTION:
Voltage peaks
- Risk of damage to electrical load or to the control unit
- → Switch off ignition and keep transmitter key outside of the transmission range (at least 5 m).
- → Switch off electrical loads before disconnecting or removing them.
Information
CAUTION:
Always comply with the regulations for handling ESD-sensitive components!
- Always wear approved work clothes and shoes when carrying out assembly work.
- Do not remove new parts from ESD (electrostatic discharge) protective packaging until shortly before installation.
- Do not touch electric pins and plug contacts.
- Push retaining clips -1-
slightly backwards -Arrow-
and swivel out the front camera -2-
from its holder -3-
.
Front camera
- Release electric plug connection -1- (-arrow A-)
and pull it off the front camera -2-
.
Electric plug connection
Information
CAUTION: Never touch the lens of the front camera. - Remove front camera.