Removing Switch Console

NOTIFICATION

CAUTION: Voltage peaks

→ Remove the ignition key and switch off load before disconnecting or removing load.

Unscrew fastening screws -1- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Fastening screws

Information

CAUTION: The switch console must be disengaged and engaged carefully.
Because of its design, pressure must not be exerted on just one side of the switch console during removal and installation.
The switch console must be unclipped and clipped in on the left and right side at the same time
Carefully disengage switch console -2- from the centre console upwards -arrows a and b- and pull it out under the centre console.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Switch console

Information
CAUTION:
Always comply with the regulations for handling ESD-sensitive components!
- Always wear approved work clothes and shoes when carrying out assembly work.
- Do not remove new parts from ESD (electrostatic discharge) protective packaging until shortly before installation.
- Do not touch electric pins and plug contacts.
Information

CAUTION: The number of plug connections can vary, depending on equipment.
Release electric plug connections -1-arrows a- and disconnect them from the switch console -2- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Electric plug connections