15 Engine - Cylinder Head, Valve Drive 2.0L - 95B - MACAN (95B)

See CHECKING AND SETTING TIMING OF CAMSHAFTS (R4) - INSTALLATION POSITION

See REMOVING AND INSTALLING CAMSHAFT ACTUATOR (R4) - INSTALLATION POSITION

See REMOVING AND INSTALLING CAMSHAFT CONTROLLER ACTUATOR (R4) - INSTALLATION POSITION

See REMOVING AND INSTALLING CHAIN TENSIONER (R4) - INSTALLATION POSITION

See REMOVING AND INSTALLING CYLINDER HEAD (R4) - INSTALLATION POSITION

See REMOVING AND INSTALLING CYLINDER HEAD COVER (R4) - INSTALLATION POSITION

See REMOVING AND INSTALLING GUIDE AND TENSIONING RAILS (R4) - INSTALLATION POSITION

See REMOVING AND INSTALLING HYDRAULIC VALVE FOR VALVE LIFT SWITCHOVER (R4) - INSTALLATION POSITION

See REMOVING AND INSTALLING LOWER CHAIN HOUSING COVER (R4) - INSTALLATION POSITION

See REMOVING AND INSTALLING TIMING CHAIN (R4) - INSTALLATION POSITION

See REMOVING AND INSTALLING UPPER CHAIN HOUSING COVER (R4) - INSTALLATION POSITION

See REMOVING AND INSTALLING VALVES (R4) - INSTALLATION POSITION

See REMOVING AND INSTALLING VALVE LIFTERS (R4) - INSTALLATION POSITION

See REPLACING VALVE-STEM SEALS (R4) - INSTALLATION POSITION