Removing Dashboard Insert
- Move steering column to its lowest, rearmost position.
- Unclip bottom of dashboard inset -1-
at the left, right and in the middle from the dashboard using a plastic wedge -2-
.
Dashboard inset, bottom
- Unscrew fastening screws -1-
and remove plastic insulating plates -2-
between dashboard inset at the top -3-
and dashboard.
Screws
- Loosen dashboard inset at the top -2-
and detach it from the dashboard.
Dashboard inset, top
- 4.1 Carefully push in plastic squeegee -1- between the dashboard inset at the top -2- and dashboard.
- 4.2 Detach dashboard inset at the top -2- in area -a- .
- Remove dashboard inset at the top -1-
.
Dashboard inset, top
- 5.1 Position a plastic squeegee -2- and plastic wedge -3- close to the fastening pins -a- between the dashboard inset at the top -1- and dashboard.
- 5.2 Disengage fastening pins -a- at the left and right by pulling them horizontally to the rear.
- 5.3 Remove dashboard inset at the top -1- .