Subsequent Work
- Install transmission support -9-
.
- 1.1 Fit transmission support -9- .
- 1.2
Fit and tighten nuts -1-
and screws -2-
.
Nuts -1- > Tightening - torque 20 Nm (15 ftlb.)
Screws -2- > Tightening - torque 70 Nm (52 ftlb.)
- 1.3
Lower >
VAS 6931 - engine and gearbox jack
and remove it from the work area.
Transmission bracket
- Install centre underbody cover.