Removing Rear Final Drive
- Disconnect electric line from rear final drive -1-
.
Electric line for servo motor for rear-differential lock
- 1.1 Release and detach the cable plug -2- .
- 1.2
Unclip clips -3-
.
Information
You will need a second mechanic to help you with this step.
- Remove rear final drive
Rear final drive
Information
Always use an intermediate layer (e.g. hard rubber) when using the jack!
- 2.1 > VAS 6931 - Engine and gearbox jack must be positioned under the final drive using a suitable support.
- 2.2 Carefully support the final drive using > VAS 6931 - engine and gearbox jack .
- 2.3 Remove screws -2- and -3- .
- 2.4 Turn down the rear final drive -Arrow- and guide it out. Get another person to help guide the final drive out of the vehicle.