LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> Macan Base >> Repair and Diagnosis (Single Page) >> Collision >> General Collision Information >> 5X - Body General >> WM, 5X00IN42 Seam Seal >> Seam Seal

Seam Seal

  1. Coat area -I-  with body sealant.
    G14360167Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Front flap

  2. Coat area -I-  with body sealant.
    G14360168Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Front door

  3. Coat area -I-  with body sealant.
    G14360169Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Rear door

  4. Coat area -I-  with body sealant.
    G14360170Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Door hinges, front and rear

  5. Seal areas with body sealant.

    Information 

    Smooth off seam seal with a spatula after applying it to the marked areas.

    1. 5.1  Coat area -C, D, F-  with body sealant.
      G14360171Courtesy of PORSCHE CARS NORTH AMERICA, INC.

      Seam seals on outside of rear lid

  6. Seal fresh cut in area -E-  with body sealant > BODY SEALANT 000.043.303.60  and smooth it off.
    G14360172Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Seam seals on outside of rear lid

    If the sealing specifications are not observed, there is a higher risk of water leaking in  at the tailgate. The following overview shows the positions -A, B, C-  on the rear lid at which additional sealing measures are required.

    G14360173Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Possible problem areas on the rear lid

  7. Coat the areas of the rear lid shown with body sealant > BODY SEALANT 000.043.207.67  .
    G14360174Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Seam seals on inside of rear lid

  8. Rework the rear lid at certain points on the cut-out for the tail light.
    G14360175Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Sealing compound

    1. 8.1  Apply body sealant > BODY SEALANT 000.043.303.60  as shown as an example and spread it out evenly.
    2. 8.2  Spread the body sealant > BODY SEALANT 000.043.303.60  towards the edges in order to guarantee leak-tightness. Smooth out even the smallest holes.
  9. A leak test must be carried out on the rear lid after applying the seam seal. To do this, follow the instructions for carrying out the leak test in the document

    > WE9000 Checking rear lid and reworking it if necessary 

  10. Coat area -I-  with body sealant.
    G14360176Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Body front section

  11. Area -I-  overlapping emerging adhesive.
    G14360177Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Front flap hinge area

  12. Coat area -I-  with body sealant.
    G14360178Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    A-pillar and cowl panel

  13. Coat area -I-  with body sealant.
    G14360179Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Front wheel housing

  14. Coat area -I-  with body sealant.
    G14360180Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Front plenum panel area

  15. Coat area -I-  with body sealant.
    G14360181Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Front spring strut mount

  16. Coat area -I-  with body sealant.
    G14360182Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Front wheel housing, lower

  17. Coat area -I-  with body sealant.
    G14360183Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Inner floorpan

  18. Coat area -I-  with body sealant.
    1. 18.1  Area -X-  overlapping bonded seam. > Distance 50 mm 
      G14360184Courtesy of PORSCHE CARS NORTH AMERICA, INC.

      Inner rear side member and tunnel

  19. Seal fresh cut in area -I-  wih body sealing compound and smooth off.
    1. 19.1  Area
      G14360185Courtesy of PORSCHE CARS NORTH AMERICA, INC.

      Rear water drain and tail light mounting

  20. Coat area -A and B-  with body sealant.
    1. 20.1  Seal fresh cut in area -Item C -  with body sealing compound and smooth off.
      G14360186Courtesy of PORSCHE CARS NORTH AMERICA, INC.

      Tail light mounting

  21. Seal off drain seams in area -I-  .
    G14360187Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Rear closing panel

  22. Coat area -I-  with body sealant.
    G14360188Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    front side member

  23. Keep drain seams clear in area

    Information 

    Smooth off seam seal with a spatula after applying it to the marked areas.

    1. 23.1  Coat area -I-  with body sealant.
      G14360189Courtesy of PORSCHE CARS NORTH AMERICA, INC.

      Underbody

      G14360190Courtesy of PORSCHE CARS NORTH AMERICA, INC.

      Side member closing element

  24. Keep drain seams clear in area

    Information 

    Smooth off seam seal with a spatula after applying it to the marked areas.

    1. 24.1  Coat area -I-  with body sealant.
      G14360191Courtesy of PORSCHE CARS NORTH AMERICA, INC.

      Front tunnel

  25. Close off drain seams in area

    Information 

    Smooth off seam seal with a spatula after applying it to the marked areas.

    1. 25.1  Coat area -L-  with body sealant.
      G14360192Courtesy of PORSCHE CARS NORTH AMERICA, INC.

      Rear end and rear side member

  26. Coat area -I-  with body sealant.
    G14360193Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Rear floor/rear side member/rear cross member

    G14360194Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Rear corner panel/rear side member

  27. Coat area
    G14360195Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Rear wheel housing

  28. Keep drain seams clear in area
    1. 28.1  Area
      G14360196Courtesy of PORSCHE CARS NORTH AMERICA, INC.

      Inner rear wheel housing and rear spring strut mount

scientia non olet · About LEMON Manuals