Preparing (Outer) Rear Wheel Housing For Installation

1. Fit in (outer) rear wheel housing.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Rear wheel housing (outer)

   1. 1.1  Cut (outer) rear wheel housing at the joints to the remaining section of the wheel housing leaving an overlap of 20 mm.
2. Prepare (outer) rear wheel housing in the marked areas for bonding and welding.

   > 5X00IN21 WORKING WITH BODY STRUCTURAL ADHESIVE PAH.071.781.00

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Rear wheel housing (outer)