Removing side cover for front underbody

Information 

• The number of fastening screws fixing clips, plug connections, holders and trim panels can vary depending on equipment. 
• The illustrations for removing and installing the drive mechanism are shown only on one equipment variant and may differ from the actual equipment variant. 
• Some steps must be carried out automatically. 
• Some of the repair illustrations show only one side of the vehicle. 

1. Open locking mechanism -1-  and pull hose for headlight ventilation -2-  out of the side cover on the front underbody -3-  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Hose for headlight ventilation

2. Unscrew screws -1 and 2-  and remove side cover for front underbody -3-  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Side cover for front underbody