LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> Macan Base >> Repair and Diagnosis (Single Page) >> Body & Frame >> Windows >> 64 Glazing, Window Operation -- 95B - MACAN (95B) >> WM, 646855 Replacing Rear Window Channel Seal >> Installing Rear Window Channel Seal

Installing Rear Window Channel Seal

  1. Installation is performed in reverse order. Pay particular attention to the following:

    The rear window channel seal is fixed to the moulding and must always be replaced.

    Coat rear window channel seal with rubber lubricant before fitting.

    The new rear window channel seal comes with a protective film applied to the moulding. The protective film must only be removed after fitting the rear window channel seal.

scientia non olet · About LEMON Manuals