Removing Trim Panel For Rear Lid
- Release light -1-
using a small screwdriver -a-
and pull it out of the trim panel.
Warning light
- Release electric plug connection -1-
(-a-
) and pull off the light -2-
.
Electric plug connection
- Open warning triangle storage box lid -1-
and unscrew screws -2-
.
Warning triangle storage box lid
- Unclip covers on finger plate -1-
using a suitable tool.
Covers on finger plates
- Unscrew and remove screws -1-
.
Mounting for finger plate
Information
To reduce the forces during removal and thereby the risk of damage, the removal steps must be carried out at the accessible connection points using a suitable tool.
- Carefully loosen the clips -marking-
on the trim panel for rear lid -1-
at the marked areas using a suitable tool.
Arrangement of retaining clips
- Remove trim panel for rear lid.