Removing Centre Console
- Disconnect electric plug connection "-1-" and electric wire harnesses "-2 and 3-".
Electric plug connections and wire harnesses
- 1.1 Release and disconnect electric plug connection "-1-" at the selector support.
- 1.2 Unclip electric wire harnesses "-2 and 3-" at the centre console "-4-" and set them aside.
- Unclip frame on switch console "-1-" by pulling it forward "-Arrow-" and remove it.
Frame on switch console
- Unclip cover on switch console "-1-" by pulling it upwards "-Arrow-" and remove it.
Cover on switch console
- Remove centre console "-4-".
Centre console
- 4.1 Unscrew nuts "-1-".
- 4.2 Lift up centre console "-4-" in the rear area, pull it to the rear and remove centring pin "-2-" from the bracket "-3-".