Removing Front Bumper

Information 

• The number of fastening screws, fixing clips, plug connections, holders and trim panels can vary depending on equipment. 

• The illustrations for removing and installing the drive mechanism are shown only on one equipment variant and may differ from the actual equipment variant. 
• Some steps must be carried out automatically. 
• Some of the repair illustrations show only one side of the vehicle. 

1. Pull off tabs -1-  and remove impact absorber -2-  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Tabs

2. Unclip ventilation guides -3-  and fold them inwards.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Ventilation guides

3. Unscrew screws -1-  , prise front bumper -3-  off the bracket -2-  using a mounting lever and remove it by pulling it forward.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Front bumper