Removing Inner Rear Closing Panel

Information 

Loosen connection points on one side only. Do not damage the sheet-metal panel underneath.

1. Heat the marked area and remove the baffles -1-  until the underlying welding points -2-  are accessible.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Baffles

2. Drill out spotwelds using > VAS 882 001 - spot-weld breaker  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Joints

3. Heat marked bonding surfaces using > V.A.G 1416 - hot-air blower  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Inner rear closing panel

4. Remove inner rear closing panel.