Removing Padding For Rear Backrest
- Only for rear left backrest:
Cover for seat belt
- 1.1 Unclip cover on seat belt -1- using a plastic wedge at the rear -arrow A- and pull it up and off -arrows B- .
- 1.2 Carefully pull cover for seat belt -1- apart at the connection point -arrow C- and guide out the seat belt.
- Pull cover for rear backrest lock -1-
off the rear backrest -2-
(-Arrow-
).
Cover for backrest lock
- Pull off cover on rear backrest locking mechanism -1-
in an upward direction using a suitable tool -2-
(-Arrow-
).
Cover on rear backrest locking mechanism
- Detach cover on rear backrest.
Cover piping
- 4.1 Carefully open retaining strips using a plastic wedge and pull out cover piping -1- .
- 4.2 Loosen cover piping -1- all the way around (-A- D- ) and remove it from the rear backrest -2- .
- Remove guide bush -1-
.
Guide bushes
Lift cover with padding at bottom from the backrest.
Press locking lugs -2- inwards -Arrow- .
Pull guide bush -1- up and out.
- Remove cover with padding for rear backrest.