Removing Main Headlight
NOTIFICATION
Voltage peaks
- Risk of damage to electrical load or to the control unit
→ Switch off ignition and keep transmitter key outside of the transmission range (at least 5 m).
→ Switch off electrical loads before disconnecting or removing them.
- Loosen headlight.
Breather hose
- 1.1 Pull breather hose -1- off the headlight -2- .
- 1.2 Release electric plug connection -3- (-arrow b- ) and disconnect it from the headlight -2- .
- Remove headlight.
Headlights
- 2.1 Unscrew fastening screws -1- .
- 2.2 Remove headlight -2- from the headlight mounting point -3- .