Installing Loudspeaker Amplifier

NOTIFICATION 

Incorrect handling of optical waveguides 

• Risk of damage to optical waveguide 
  1. → Observe the requirements for working with and installing optical waveguides.

Information 

Always comply with the regulations for handling ESD-sensitive components!

• Always wear approved work clothes and shoes when carrying out assembly work. 
• Do not remove new parts from ESD (electrostatic discharge) protective packaging until shortly before installation. 
• Do not touch electric pins and plug contacts. 

1. Installation is performed in reverse order. Pay particular attention to the following:

   Tighten fastening screws securing loudspeaker booster to holder to > Tightening - torque 6 Nm (4.5 ftlb.)  .