Technical Values
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Clutch to flywheel: Step 1 | M8 x 16 - tighten in several steps and crosswise | Initial tightening | 10 Nm (7.4 ftlb.) | ||
| Clutch to flywheel: Step 2 | M8 x 16 - tighten in several steps and crosswise | Initial tightening | 20 Nm (14.8 ftlb.) | ||
| Clutch to flywheel: Step 3 | Tighten crosswise | Final tightening torque angle | 90 Degree | +/- 2 Degree |