Removing Front Pressure Line

1. Loosen and unscrew the relevant cap screw -2-  on the distributor -1-  in the tunnel.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Hydraulic line on distributor in the tunnel

   1. 1.1 Collect escaping hydraulic fluid.
2. Disconnect separating coupling for -1-  pressure line -2-  in the wheel housing.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Decoupler on front axle lift pressure line

   1. 2.1 Remove connection line holder -3-  . Unscrew the screw -4-  and remove the holder.
   2. 2.2 Open clamp on the decoupler -1-  using the recommended tool and pull the connecting line off the pressure line.
3. Unclip and remove pressure line.
   1. 3.1 View of right pressure line:

      Courtesy of PORSCHE CARS NORTH AMERICA, INC.

      Pressure line right side

      1	Front pressure line right
      2	Clip for pressure line
      3	Transition to right wheel housing -Arrows-
      4	Separating clutch holder in wheel housing

   2. 3.2 View of left pressure line:

      Open the catch bar on the holder -2- if necessary and disconnect the coolant hoses to make the pressure line easier. 

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Pressure line on left side