Technical Values
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| PASM control unit to holder | Internal hexagon roundhead bolt, M5 x 12 | Tightening torque | 5.7 Nm (4.2 ftlb.) | ||
|
PASM control unit holder |
|||||
| Holder for PASM control unit to body | Hexagon nut, M6 | Tightening torque | 8 Nm (6 ftlb.) | ||
|
Mounting for PASM control unit |
|||||