Preliminary Work
- Deactivate front axle lift system using the button in the vehicle (lower the vehicle).
- If the vehicle cannot be lowered using the button
Carry out emergency release via emergency release valve on compressor -1- .
Screw for emergency drain valve on compressor
- 2.1 Remove stopper -2- .
- 2.2 Loosen screw -3- until the vehicle is lowered.
- 2.3 Wait until the vehicle is fully lowered.
- 2.4 Screw in and tighten screw -3-
.
> Tightening torque 3 Nm (2.2 ftlb.) + 0.5 Nm (0.4 ftlb.)
- 2.5 Clip in stopper -2- .
- Removing the front wheel.
440519 REMOVING AND INSTALLING WHEEL - information on "Removing"
or →
- Removing wheel with central bolt.
440519 REMOVING AND INSTALLING WHEEL WITH CENTRAL BOLT - information on "Removing"