Technical Values
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Holder for coolant pipes (front-axle carrier, rear) | Screw, M6 x 16 | Tightening torque | 8 Nm (6 ftlb.) | ||
| Power-steering gear to front-axle cross member | Hex bolt M10 x 60/always replace after removal | Initial tightening | 30 Nm (22.1 ftlb.) | ||
| Power-steering gear to front-axle cross member | Hex bolt M10 x 60/always replace after removal | Final tightening | + 90° |