Technical Values
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Steering column to control panel support | Hexagon nut M8/observe tightening sequence! | Tightening torque | 25 Nm (18.4 ftlb.) | ||
| Upper universal joint on steering column | Hexagon round-heat bolt M8 X 30/replace after each disassembly | Pre-tightening | 20 Nm (14.8 ftlb.) | ||
| Upper universal joint on steering column | Hexagon round-heat bolt M8 X 30/replace after each disassembly | Final tightening | + 90° |