Removing Trim Panel (Upper Part)
- Move steering wheel to the lower, rear position.
- Detach casing (upper part) -1-
from casing (lower part).
Mounting for casing (upper part/lower part)
- 2.1 Turn the steering wheel so that the openings on the front of the casing (upper part) are accessible.
- 2.2 Unclip casing (upper part) -2- and lift it up -arrow A- .
- Disconnect wire harness for microphone for telephone from the casing (upper part).
Wire harness for microphone for telephone
- 3.1 Unclip microphone for telephone -1- .
- 3.2 Unclip electric plug connection -2- .
- Detach casing (upper part) -1-
from the dashboard inset -2-
.
Mounting for casing (upper part) on dashboard inset
- 4.1 Loosen clip connections -3- .