Technical Values
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Heat protection shield for actuator on outlet side | M6 screw | Tightening torque | 10 Nm (7.5 ftlb.) | ||
| Coolant regulator to housing | External Torx, M6 x 20 | Tightening torque | 13 Nm (9.5 ftlb.) | ||
| Valve block to holder | Screw, M6 | Tightening torque | 10 Nm (7.5 ftlb.) | ||
| Terminal 50 line to starter | Collar nut, M6 | Tightening torque | 6.5 Nm (5 ftlb.) | +/- 1 Nm | |
| Ground line for ignition coil to cylinder head cover | Tightening torque | 10 Nm (7.4 ftlb.) |