Removing Sub-Part For Tail Light

Information 

The removal and installation steps are described for the left tail light sub-part.

The procedure for removing and installing the right tail light sub-part is identical.

1. Loosen sub-part for tail light.
   1. 1.1 Release and disconnect electric plug connections -1 - 4-  . Press connector for the tail light sub-part line -3 and 4-  in through the body opening.
   2. 1.2 Unclip retaining clips -5-  on the body.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Sub-part for tail light

2. Cut and pull off insulation for the line -1-  on the wire harness.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Wire harness for sub-part for tail light

3. Remove tail light sub-part line -1-  from the insulation.
4. Cut off tail light sub-part line -1-  in area -X-  .
5. Remove tail light sub-part line -2-  .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Sub-part for tail light