Removing Sub-Part For Front Fan

Information 

• Some of the repair illustrations show only one side of the vehicle or a similar component. 
• Naturally, some steps also have to be performed on the opposite side of the vehicle as well. 

Information 

Select a place for the joint where there is enough space to join all the lines present.

Do not cut the lines too short in case they have to be laid in a different position if there is insufficient space in the area of the joint.

1. Release and disconnect electric plug connection at connection point for the fan -1-  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Electric plug connection

2. Expose electric wire harness sub-part for front fan in the marked area -X-  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Sub-part for fan

3. Cut wire electric wire harness for front fan in the marked area -X-  .
4. Remove the wire harness you have just cut off.